Biofuel Canada Batch Systems

Automated BIO800 Reactors and Holding Tank

BIO800s are PLC Controlled batch units and are stand alone, pressurized (ASME certified) biodiesel reactors, designed to operate at 90 Celsius. Makes 800 litres of quality biodiesel in about one hour.

You could easily produce 20,000 litres in 24 hours.

Industrial grade 1000 litre stainless steel vessel and stainless steel stand.

Stainless steel centrifugal pumps.

All components in the circulating loop are made of stainless steel.

Explosion Proof Motors.

CSA/ UL(USA) approved Nema 4 Control Panel.

Thermal and ASME Certified Pressure Protection.

Integrated electronic controls to provide hands free transfer of liquids, heating and mixing.

Equipped with electric heating.

Automatic operator preset temperature controls

Single Phase 240v or Three Phase.

Vessels are fully insulated with 2" Tank Wrap and furnished with industrial grade steel wrap.

Automatic operation with the MR-5 demethylator

MR-5 METHANOL RECOVERY

Continuous methanol recovery for reuse after biodiesel reaction from combined reactant products of

biodiesel and glycerol at a flow rate of 5 gpm (18.9 lpm). 10 gpm model available.

Includes

Class 1 Divsion 2 Air Purged Enclosure

Intrinsically safe barrier for parts in contact with methanol

5 ton chiller and chiller tank resevoir and pump

pump to move demethylated products from vacuum to 13 psi (30 feet of head) at 5 gpm.

Power requirements: 208-240 VAC Single phase (50/60 hz) 30 Amp circuit, 20 Amps continuous.

Automatic operation with a BD-5 centrifuge (when purchased at the same time). One push of a button

starts the process when fluids are available. When fluids run out or there is a fault condition, the

system goes through a shutdown phase.

BD-5 BIODIESEL CENTRIFUGE

Flow rates up to 5 gallons per minute (18.9 liters per minute) of incoming product for separation, and

variable output from 4 gallons per minute down to zero gallons per minute.

If run continuously for 24 hours / 7 days a week, one BD-5 will process over 8.2 million liters per year.

Power requirements: 2 Hp motor needs 208-240VAC Single Phase 10 Amp circuit.

2 or more BD-5's can be operated in parallel.

Operational within 60 seconds of startup; shuts down in the same amount of time.

ION RESIN WASH

Produce EN14214 or ASTM 6751 standard Biodiesel with ease by using an Ion Resin. We offer three

sizes. IRW-400 (400 Litres/Hour), IRW-800 (800 Litres/Hour) and IRW-1600 (1600 Litres/Hour).

Washing can be done continuously or by batch. An Ion Resin Wash is simply the most effective method

of washing biodiesel without the water. PLC Controlled Turn Key Wash Skid includes resin regeneration

process. Designed to be used with either Purolite, Lewatit or Amberlite Ion Resins.

Updated February 2009